17
4.2 Communicating with the Rackmount Remote Power Manager
To configure the power manager or invoke command functions, you must first
connect to the power manager and access command mode. The power manager
offers two separate command interfaces: the Web browser interface and the text
interface. The Web browser interface allows you to contact the power manager via
a TCP/IP network by using a standard JavaScript
®
enabled Web browser (such as
Internet Explorer or Netscape Navigator
®
). The text interface consists of a series of
ASCII text menus, which you can access via a TCP/IP network, local PC, or
modem.
The power manager also offers three different methods for accessing command
mode: via a network, via a local PC, or via an external modem.
NOTE
Configuration functions are only available when you have logged into
the power manager’s command mode using the system password.
4.2.1 A
CCESSING THE
W
EB
B
ROWSER
I
NTERFACE
To use the Web browser interface, the power manager must be connected to a
TCP/IP network. Also, your PC must be equipped with a JavaScript enabled Web
browser (such as Internet Explorer or Netscape Navigator).
1. Start your JavaScript enabled Web browser.
2. Type the power manager’s IP address (default =
http://192.168.168.168
)
into the Web browser’s address bar, then press
Enter
.
3. The power manager will display a prompt that asks for your name and
password.
a. User name: If you have not previously defined a user name, then this field
should be left blank. A user name is only required when one has been
defined via the General Parameters menu.
b. Password: Type in your system password or plug password, then click on
OK
.
NOTE
Plug passwords do not permit access to configuration functions.
c. If the system password has not been defined, simply click on the
OK
button
without typing in a name or password.
CHAPTER 4: Configuration
Содержание PS580A
Страница 3: ......
