Black Box PS580A, Руководство пользователя

Страница: 26 / 54

23
NOTES
The user name is required only when the power manager is accessed
via the Web browser interface. (The user name must be 4 to 16
characters, and the default is undefined.)
If a user name is defined, then users who log in with a plug password
(user mode) will also need to enter this same user name at the login
prompt when attempting to access command mode via the Web browser
interface.
The user name cannot begin with a forward slash (/) or backslash (\)
character.
The user name cannot include non-printable characters, spaces,
asterisks (*), or quotation marks.
• Site ID: The site ID defines a brief text message that describes the power
manager’s location. (The site ID must be up to 32 characters, and the default
value is undefined.)
NOTES
The site ID message cannot begin with a forward slash (/) or backslash
(\) character.
The site ID message cannot include non-printable characters or
quotation marks.
• Command echo: When command echo is enabled, ASCII commands sent via
the text interface will be echoed back, allowing keystrokes to be displayed. This
feature applies only to the text interface and has no visible effect on the Web
browser interface. (The default value is on.)
• Inactivity timeout: The inactivity timeout setting determines how long the
power manager will wait for additional commands during periods of inactivity.
When the timeout period elapses, the user will be disconnected from the
power manager’s command mode. (The default value is 2 minutes.)
• Command confirmation: When enabled, the power manager will display a
confirmation prompt before executing certain commands. When disabled,
the prompt will be suppressed and commands will be executed immediately.
(The default value is on/enabled.)
• Automated mode: When enabled, the power manager will execute switching,
reboot, and exit commands without displaying a confirmation prompt, status
screen, or confirmation messages. For more information, please refer to
Section 5.4 . (The default value is off.)
CHAPTER 4: Configuration