Black Box PS580A, Руководство пользователя

Страница: 14 / 54

11
CHAPTER 2: Overview
Table 2-1. Back-panel components.
Component Description
Network port An RJ-45 Ethernet port for connection to your
TCP/IP network. The default IP address is
192.168.168.168. For more information, refer to
Section 4.3.4 .
ACT LED Flashes to indicate activity at the network port.
RDY LED Flashes continuously when the power manager
is ready to receive commands.
COM/RS-232 port This DB9, COM/RS-232 (DTE) serial port
connects to a local terminal or external modem,
as described in Section 3.3 .
Default button This button resets the unit to default parameters
or manually toggles all plugs on or off.
Default parameters: With the master I/O switch
(master power switch) set to the Off position,
press and hold the default button, then set the
master I/O switch to the On position and release
the default button. All menu-defined parameters
will reset to default values.
Manual plug toggle: Press the default button and
and hold it down for three seconds. All power
outlets will be toggled on or off.
Switched plugs and plug Four 100- to 120-VAC, NEMA 5-15R or 208- to
indicators 240-VAC IEC-320-C13 AC oulets that can be
switched on, off, or rebooted in response to user
commands. The outlets have indicator lights and
support 15 or 10 amps total load.
❶
❷
❸
❹
❺
❻