38
MINIATURE 2-CHANNEL STATISTICAL MULTIPLEXOR
Table 4-6. Remote Configuration Menu Items.
Code
Item
Description
1
TRANSFER
Used to initiate transfer of current remote Multiplexor
CONFIGURATION
configuration to the local Multiplexor. After remote
FROM REMOTE TO
configuration is received by the local Mux, it can be
LOCAL
examined using the terminal connected to the local
Mux. As an additional convenience, remote Mux
configuration can be stored in the local Mux, thereby
serving as a backup that can be downloaded again
into the remote Mux in case that unit is replaced.
2
TRANSFER
Similar to item 1 except that it is used to initiate
CONFIGURATION
transfer of the remote Mux configuration, prepared
FROM LOCAL TO
on the local Mux, to the remote Mux.
REMOTE
3
PREPARE REMOTE Used to initiate preparation of remote Mux
MULITPLEXOR
configuration, using the terminal connected to the
CONFIGURATION
local Mux.
4
ACTIVATE REMOTE Used to restart the remote Mux; if a new
MULTIPLEXOR
configuration was transferred from the local Mux to
CONFIGURATION
the remote Mux, this command will activate the new
configuration.
Q
EXIT
Return to SYSTEM CONFIGURATION menu.
4.29 Transfer Configuration from Remote to Local Screen
Provides an indication that the Multiplexor is executing the required actions after
selecting item 1 on the REMOTE MULTIPLEXOR CONFIGURATION menu
above.
This screen is displayed after selecting item 1 on the REMOTE MUTLIPLEXOR
CONFIGURATION menu, while the remote configuration information is
transmitted to the local Multiplexor.
