40
MINIATURE 2-CHANNEL STATISTICAL MULTIPLEXOR
4.31 Examine Remote Multiplexor Configuration Screen
Displays the information regarding remote Multiplexor configuration, received by
selecting item 1 on the REMOTE MULTIPLEXOR CONFIGURATION menu.
The screen displays the parameters selected for the remote Multiplexor sub-
channels.
No action is required on this screen. When you finish looking at this
information, press Q to go back to the REMOTE MULTIPLEXOR
CONFIGURATION menu.
4.32 Save in Local Multiplexor Screen
Confirms that a copy of the configuration of the remote Multiplexor has been
stored in the local Multiplexor, as you instructed by selecting item 1 on the
REMOTE MULTIPLEXOR CONFIGURATION menu.
NOTE
The remote configuration does not override the local configuration: it is
only stored for receiving and backup purpose.
REMOTE CONFIGURATION HAS BEEN SAVED ON LOCAL MULTIPLEXOR
Press Q to exit
Typing Q on this menu will return you to the REMOTE MULTIPLEXOR
CONFIGURATION menu.
4.33 Transfer Configuration from Local to Remote Screen
Provide an indication that the Multiplexor executes the required actions after
selecting item 2 on the REMOTE MULTIPLEXOR CONFIGURATION menu
(
Section 4.28
).
This screen is displayed after selecting item 2 on the REMOTE MULTIPLEXOR
CONFIGURATION menu, while the configuration of the local Multiplexor is
transmitted to the remote Multiplexor, for viewing it there, or for back-up
purposes.
