36
MINIATURE 2-CHANNEL STATISTICAL MULTIPLEXOR
Code Q is used to retum to the MAIN MENU screen.
When you first enter the DIAGNOSTICS menu, the CURRENT STATE line
shows: ALL TESTS IN THE OFF STATE.
Type the code number corresponding to the desired test loop type.
Type Q to retum to the MAIN MENU screen.
4.24 Local Loops Screen
View the current status of the local sub-channel and composite channel loops
and go, if desired, to the control screen for any of these loops.
Code numbers 0 through 2 list the available local loops: composite loop
and loops for each sub-channel.
Code Q is used to return to the DIAGNOSTICS screen.
The CURRENT STATE line shows the current status of the available local loops:
on or off.
To change the condition of any test loop, type the appropriate code number
to go to the loop control screen.
After completing the required actions, type Q to return to the DIAGNOSTICS
screen.
4.25 Remote Loops Screen
View the current status of the remote sub-channel and composite channel loops
and go, if desired, to the control screen for any of these loops.
Its functions are similar to those of the LOCAL LOOPS screen.
