IP, NETMASK, GATEWAY commands
The IP, NETMASK, GATEWAY commands set the TCP/IP parameters for telnet management.
NTU_CM_S09_P1>IP 10.0.0.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line Rate,kbit/s : 1296
Master/Slave : Master
Adaptive mode : ON
Operation mode : Transparent
Ethernet
Speed : 100
Duplex mode : FULL
Telnet mode : OFF
IP Address : 10.0.0.1
Subnet mask : 255.0.0.0
Default gateway : 10.27.66.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please reset the system, and the change will be take effect
NTU_CM_S09_P1>NETMASK 255.0.0.0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line Rate,kbit/s : 1296
Master/Slave : Master
Adaptive mode : ON
Operation mode : Transparent
Ethernet
Speed : 100
Duplex mode : FULL
Telnet mode : OFF
IP Address : 10.0.0.1
IP Address : 255.0.0.0
Default gateway : 10.27.66.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please reset the system, and the change will be take effect
NTU_CM_S09_P1>GATEWAY 10.0.1.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line Rate,kbit/s : 1296
Master/Slave : Master
Adaptive mode : ON
Operation mode : Transparent
Ethernet
Speed : 100
Duplex mode : FULL
Telnet mode : OFF
IP Address : 10.0.0.1
Subnet mask : 255.0.0.0
Default gateway : 10.0.1.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please reset the system, and the change will be take effect
Date 21.10.03
page 25 of 29