NTU_CM_S09_P1>
CONFIG command
The CONFIG command informs the user about the configured parameters.
NTU_CM_S09_P1>CONFIG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line Rate,kbit/s : 2320
Master/Slave : Slave
Adaptive mode : ON
Operation mode : Transparent
Ethernet
Speed : AUTO
Duplex mode : AUTO
Telnet mode : ON
IP Address : 10.7.1.1
Subnet mask : 255.0.0.0
Default gateway : 10.27.66.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NTU_CM_S09_P1>
RESET command
The RESET command restarts the modem.
NTU_CM_S09_P1>RESET
01:55:02 system reset
MASTER command
The MASTER command sets the modem either in the maser or slave modes.
NTU_CM_S09_P1>MASTER ON
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line Rate,kbit/s : 2320
Master/Slave : Master
Adaptive mode : ON
Operation mode : Transparent
Ethernet
Speed : AUTO
Duplex mode : AUTO
Telnet mode : ON
IP Address : 10.7.1.1
Subnet mask : 255.0.0.0
Default gateway : 10.27.66.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NTU_CM_S09_P1>
Date 21.10.03
page 20 of 29
