LINERATE command
The LINERATE command determines the modem connection rate over the line. The number parameters
from 1 to 16 determine the connection rate.
NTU_CM_S09_P1>LINERATE 12
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line Rate,kbit/s : 1296
Master/Slave : Master
Adaptive mode : ON
Operation mode : Transparent
Ethernet
Speed : AUTO
Duplex mode : AUTO
Telnet mode : ON
IP Address : 10.7.1.1
Subnet mask : 255.0.0.0
Default gateway : 10.27.66.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NTU_CM_S09_P1>
ADAPTIVE command
The ADAPTIVE command adjusts the line rate of the slave modem to the line rate of the master modem.
The line rates should be set equal on both modems.
NTU_CM_S09_P1>ADAPTIVE ON
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line Rate,kbit/s : 1296
Master/Slave : Master
Adaptive mode : ON
Operation mode : Transparent
Ethernet
Speed : AUTO
Duplex mode : AUTO
Telnet mode : ON
IP Address : 10.7.1.1
Subnet mask : 255.0.0.0
Default gateway : 10.27.66.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NTU_CM_S09_P1>
Date 21.10.03
page 21 of 29
