The command system
Basic rules
After the command is typed, press <enter>.
The <Backspace> key is used to edit commands.
Some commands have the parameter <C> to update the information on the screen. This mode starts acting
after the command is entered. To exit from the mode press any key.
Each command has the (H)elp command to help the user and the (M)ain command to return to the main
menu.
The main menu
The main menu is the following:
Black Box MDSL
Ethernet Monitor V1.21
+------------------------+
| Main Menu |
+------------------------+
1. Performance management (PM)
2. Fault and maintenance management (FMM)
3. Configuration management (CM)
4. Security management (SM)
NTU> Select [1..4]:
The menu consists of four submenus. To choose the needed submenu, it is necessary to type its
number and press “Enter”. The main menu also contains information about the current version of
the firmware. It is important that you inform the service center about it when being consulted.
Date 21.10.03
page 13 of 29
