![background image](http://html1.mh-extra.com/html/bk-precision/5335c/5335c_user-manual_2759775060.webp)
CHAPTER 10. ROUTINE MAINTENANCE
51
1.
Select “SYSTEM > INITIAL” in the “Menu” interface to enter the system initialization interface. See the
following figure.
2.
Select the menu items to be initialized (blue symbol background) via button. Menu items with characters ##
following should be initialized; ## indicates that the items will not be initialized.
3.
Press the soft key corresponding to the symbol on the right of the interface to determine whether to
initialize this menu item. Or use the soft key “ ” (for initialization of all menu items) or “ ” (no initialization for
all menu items) in the lower part of the interface.
4.
Press the “START” soft key to initialize system settings. Press the ESC to exit.
Prompt information
Explanation of prompt information
Cal Zero is working!
The instrument is calibrating the zero point.
Cal Zero is completed!
The instrument has completed zero point calibration.
Test screen
Self-inspection of LCD screen
Test dsp
Self-inspection of DSP.
Test beep
Self-inspection of the buzzer.
SelfTest is finished!
The instrument has finished the self-test.
Softkey is not available
The current soft key is not available.
Time set ok!
The time setting is completed.
Meter Initialization
Initialization of general measurement
Integ Initialization
Initialization of integral function
Scope Initialization
Initialization of the oscilloscope function
Harmonic Initialization
Initialization of the harmonic function
Inrush Initialization
Initialization of the inrush function
Setup Initialization
Initialization of setup
System Initialization
Initialization of the system
Initialization is finished!
Initialization is finished.
Integ start
Integration is started.
Integ stop
Integration is stopped.
Integ time up
The integral time is up.
Max page has been
reached.
It displays The maximum page has been reached.
One page should exist at
least
One page should exist at least.
Not used in current state
The current operation is not available.
Please reset first
Please reset first.
10.4
Troubleshooting