EN
www.BISSELL.com
6
Tool Caddy Options
Getting Started
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
2
1
Step gently on base and pull back on
handle to recline.
3
Turn Height
Adjustment Knob
to desired carpet
cleaning level.
NOTE:
For optimal carpet cleaning
performance, adjust to the lowest
practical setting. If your vacuum is difficult
to push, adjust to the next higher setting.
NOTE:
Be sure the green suction knob on side of vacuum is turned to
“Floor Suction” before use.
NOTE:
In the unlikely event that hair
wrapped around your brush roll, run vacuum
back and forth on clean carpet several times.
This will help release any wrapped hair.
Turn vacuum on by pressing Power Switch on
(I - ON and O - OFF). Press Brush roll switch to
run the PowerBrush for carpet cleaning (brush
roll is on when light on switch is illuminated).
NOTE:
The brush roll will automatically shut off
when vacuum is locked in upright position,
recline to reactivate.
Store both the Flexible Crevice Tool
and the Pet TurboEraser Tool. Push
hard on the double tool caddy to
slide it on the base of the vacuum.
DOUBLE
TOOL CADDY
Brushroll
On/Off
Switch
Power
On/Off
Switch
