EN
www.BISSELL.com
12
2
Clean & Replace Pre-Motor Filters
Both the Pre-Motor Mesh and
Foam filters are washable.
Clean with mild detergent,
rinse and squeeze all excess
water. Allow filters to dry
completely before reinserting.
Place dry pre-motor filters
back in the top of dirt
container placing the thick
foam filter last.
1
3
4
3
Clean & Replace Post-Motor Filter
2
1
Lift to remove filter.
When reassembling, place
filter back in unit and twist
clockwise to “click” into place.
The pleated filter may NOT
be washed. If dust/debris
accumulates, gently tap the
filter on inside of a trash bin.
24
h