58
40016512
59
11/2017
ECO MODE (continued)
PROGRAMMES P1 AND P2
COMFORT MODE
A) Linked Eco operation
The linked economy mode allows the temperature to be reduced by
3.5°C
compared to the
desired temperature level for the COMFORT setting.
The user cannot change this temperature set-
ting. It cannot be higher than
19°C
or lower
than
7°C
.
B) Unlinked Eco operation
You can choose to unlink the Eco mode temperature from that of the Comfort mode (see
chapter 5.5
parameter 2). You can then choose the desired room temperature when the
appliance is running in Eco mode.
The unlinked eco temperature must differ by at least 1° from the temperature set for Comfort
mode. (e.g.: your
Eco
temperature cannot be higher than
18°C
if your
Comfort
temperature is
set at
19°C
).
If you don't enter a setting, the unlinked Eco temperature will have a default value of
15.5°C
.
(recommended if the room is occupied)
This temperature level can be adjusted from
7 to 28°C
in
0.5°C steps.
The LED on the appliance is on, showing red.
mode
boost
mode
boost
mode
boost
(Pre-set programmes)
Your appliance's remote control includes two daily programmes, P1 and P2. These are based on
various room usage scenarios which alternate between Comfort mode and Eco mode for your
appliance, depending on the time.
The LED on the appliance will light up with the colour corresponding to the current operating
mode (see
chapter 4.2
).
P1
is to heat your room between 5 and 9am, then from 5 to
11pm (e.g. working day).
P2
is to heat your room between 5 and 9am, from 12 to 2pm
and then from 5 to 11pm (e.g. working day, returning home at
midday).
NOTE:
You can also set a detailed procedure of these programmes P1 and P2 yourself (see
chapter 7
).
Default content for
programme P1
Default content for
programme P2
mode
boost
mode
boost
7 to
19°C
