70
40016512
71
11/2017
ACTIVATION AND RUNNING PROGRAMMED BOOST (continued)
mode
boost
mode
boost
mode
boost
Press
on the
boost
key
for
2 seconds
.
Note:
The total continuous
operating time for the
boost should not last more
than
2 hours
(120 minutes).
Note:
It is mandatory to
set the starting time to
enable the automatic boost
(see
chapter 4
).
The programmed
boost is disabled.
The boost will not
automatically start
the next day.
You can quit
a programmed boost
at all times by pressing
the
boost
key.
The expected duration of the boost
is finished.
The appliance returns to normal
operating mode.
The boost will start again the next
day at the same time, as long as
the programme is activated (
icon fixed).
INTRODUCTION
ACCESS TO PROGRAMMING
7. Setting a P1 and/or P2 programme
The setting temperature for
P1
and
P2
modes is linked to the programming set by the user depen-
ding on the time and day. There are two possible modes for each hour, either
COMFORT
, or
ECO
.
WARNING!
The programmes P1 and P2 can have a
maximum of 10 changes
of mode per day
(from Comfort to Eco or Eco to Comfort).
Long press (
P1P2
and
+
)
open settings for
programme
P1
.
Long press (
P1P2
and
-
)
open settings for
programme
P2
.
mode
boost
mode
boost
mode
boost
Short press on
mode:
move to
next day.
Long press on
mode:
move to
next day, copies
the current daily
programme.
Short press on
P1P2:
back to
previous day.
Long press on
P1P2:
back to
previous day, copies
the current daily
programme.
Program the
current time in
Comfort mode.
Program the
current time in
Eco mode.
