background image

78

40016512

79

11/2017

8.3 Replacing batteries

mode

boost

When the low battery indicator light 

is displayed, you have a few days 

to replace them (2x 1.5V alkaline 

batteries, type LR03 or AAA; we 

advise against using rechargeable 

batteries).

The screen's backlighting also 

stops turning on to indicate the need to change 

batteries.

When batteries are replaced, the remote control 

parameters are stored (e.g.: P1 and P2 pro-

gramming), except for time and date settings.

You should take the following precautions:

– ensure c/– polarity;

– take care when disposing of used batteries: 

protect the environment by disposing of them 

at an approved collection point.

mode

boost

Remove

the used 

batteries.

Insert

the new 

batteries.

9. Services and guarantee

After-sales service

If your appliance stops working or you require spare parts, contact your installer or dealer.

Prior to making contact and to ensure your problem is dealt with quickly and effectively, please 

make a note of:

- the details shown on the appliance nameplate (

see

 

chapter 2.2

),

- the sales reference for your appliance shown on your dated purchase invoice,

- the remote control version number (

see chapter 5.5

, parameter 9).

Guarantee

(See general conditions of sale for your country)

The heating body of your electric radiator is guaranteed against manufacturing defects for five 

(5) years from the date of purchase, while the other components are guaranteed for two (2) years.

Dated proof of purchase must be presented to activate the guarantee. The guarantee does not 

cover radiator transport, removal and installation costs.

The guarantee shall not apply if the appliance is installed, used or maintained in a way that 

does not comply with standards in force in the relevant country, good professional practice, or the 

manufacturer’s instructions.

Guarantee specific to dual-energy, towel-drying radiators

The guarantee for your dual-energy towel dryer is subject to the following reservations:

- water used in the heating circuit is neither aggressive nor corrosive.

- there are no traces of dissolved gases (0

2

-CO

2

), notably where gas-permeable materials are 

used (heating floor).

In such a case, thorough degasification must be performed upstream from the circulator and the 

bleed tap on the upper section of the appliance.

Disposal of end-of-life electrical and electronic appliances. 

This symbol indicates 

that this product should not be disposed of with household waste. It must be taken to a 

suitable collection point to be recycled. By disposing of this product correctly, you will help 

prevent potential negative consequences for the environment and human health.

Standby consumption for the appliance < 0.5W

mode

mode

Re-pairing takes

place automatically when 

batteries are changed.

Lever off the frame.

Replace the control frame. 

See 

chapter 4.1

 to reset 

the remote control.

Содержание 40016512






















Отзывы: