manualshive.com logo in svg

BIRD SignalHawk SH-36S-PC, Руководство по эксплуатации

Поделиться
Скачать
BIRD SignalHawk SH-36S-PC Скачать руководство пользователя страница 66

SignalHawk™ PC and Rack Mount Models

51

Channel Power Measurement

Channel Power measures the Integration Bandwidth, the total power over a 
frequency range, concentrated on the center frequency of the sweep. It is 
useful for channelized (frequency-division multiplexed) signals. Results are 
shown in both total power in the channel (in dBm or Watts), and spectral 
density (dBm or Watts per Hz).

Setting Channel Power

Note:

 

For best accuracy, set the center frequency so the signal is 

roughly centered before taking measurements. In addition, the 
span should be 1½ – 5 times as large as the desired channel width.

1.

Select the Integration Bandwidth (IBW).

Note:

 

The IBW is automatically set when a channelized frequency 

band is selected from the Frequency list.

2.

Enter the desired bandwidth. 

3.

Select the desired unit. 

Note:

 

The default unit is MHz.

Note:

 

The integration bandwidth, channel power, and power 

density will be displayed in the “measurement settings” area at the 
bottom of the display. Markers 1 and 2 will be turned on, and 
placed at the band edges.

Figure

 

40  

 

Example, Channel Power

STEP 1

Measurement 
Settings

Содержание SignalHawk SH-36S-PC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды