manualshive.com logo in svg

BIRD SignalHawk SH-36S-PC, Руководство по эксплуатации

Поделиться
Скачать
BIRD SignalHawk SH-36S-PC Скачать руководство пользователя страница 132

SignalHawk™ PC and Rack Mount Models

117

15.

UPGRADES. 

To use upgrade software, you must first be licensed for the 

software that is eligible for the upgrade. Upon upgrade, this agreement 
takes the place of the agreement for the software you upgraded from. After 
you upgrade, you may no longer use the software you upgraded from. 

16.

PROOF OF LICENSE. 

a.

Genuine Proof of License. 

If you acquired the software on a disc or 

other media, your proof of license is the genuine Microsoft 
certificate of authenticity label with the accompanying genuine 
product key, and your proof of purchase. If you purchased and 
downloaded the software online, your proof of license is the 
genuine Microsoft product key for the software which you 
received with your purchase, and your proof of purchase from an 
authorized electronic supplier of genuine Microsoft software. 
Proof of purchase may be subject to verification by your 
merchant’s records. 

b.

Windows Anytime Upgrade License. 

If you upgrade the software 

using Windows Anytime Upgrade, your proof of license is the 
proof of license for the software you upgraded from, your 
Windows Anytime Upgrade product key and your proof of 
purchase. Proof of purchase may be subject to verification by your 
merchant’s records. 

c.

To identify genuine Microsoft software, see www.howtotell.com. 

17.

TRANSFER TO ANOTHER COMPUTER. 

a.

Software Other than Windows Anytime Upgrade. 

You may 

transfer the software and install it on another computer for your 
use. That computer becomes the licensed computer. You may not 
do so to share this license between computers. 

b.

Windows Anytime Upgrade Software. 

You may transfer the 

software and install it on another computer, but only if the license 
terms of the software you upgraded from allows you to do so. That 
computer becomes the licensed computer. You may not do so to 
share this license between computers. 

18.

TRANSFER TO A THIRD PARTY. 

a.

Software Other Than Windows Anytime Upgrade. 

The first user 

of the software may make a one time transfer of the software and 
this agreement, by transferring the original media, the certificate 
of authenticity, the product key and the proof of purchase directly 
to a third party. The first user must remove the software before 
transferring it separately from the computer. The first user may 
not retain any copies of the software. 

b.

Windows Anytime Upgrade Software. 

You may transfer the 

software directly to a third party only with the licensed computer. 
You may not keep any copies of the software or any earlier edition. 

Содержание SignalHawk SH-36S-PC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды