manualshive.com logo in svg

BIRD SignalHawk SH-36S-PC, Руководство по эксплуатации, Страница: 123 / 137

Поделиться
Скачать
BIRD SignalHawk SH-36S-PC Скачать руководство пользователя страница 123

Software License Terms

108

2.

INSTALLATION AND USE RIGHTS. 

a.

One Copy per Computer. 

You may install one copy of the software 

on one computer. That computer is the “licensed computer.” 

b.

Licensed Computer. 

You may use the software on up to two 

processors on the licensed computer at one time. Unless 
otherwise provided in these license terms, you may not use the 
software on any other computer. 

c.

Number of Users. 

Unless otherwise provided in these license 

terms, only one user may use the software at a time. 

d.

Alternative Versions. 

The software may include more than one 

version, such as 32-bit and 64-bit. You may install and use only one 
version at one time. 

3.

ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS. 

a.

Multiplexing. 

Hardware or software you use to 

pool connections, or 

reduce the number of devices or users that directly access or 
use the software  

(sometimes referred to as “multiplexing” or “pooling”), does 

not reduce the number of licenses you need. 

b.

Font Components. 

While the software is running, you may use its 

fonts to display and print content. You may only 

embed fonts in content as permitted by the embedding 
restrictions in the fonts; and 

temporarily download them to a printer or other output 
device to print content. 

c.

Icons, images and sounds. 

While the software is running, you may 

use but not share its icons, images, sounds, and media. The sample 
images, sounds and media provided with the software are for your 
non-commercial use only. 

d.

Use with Virtualization Technologies. 

Instead of using the 

software directly on the licensed computer, you may install and 
use the software within only one virtual (or otherwise emulated) 
hardware system on the licensed computer. When used in a 
virtualized environment, content protected by digital rights 
management technology, BitLocker or any full volume disk drive 
encryption technology may not be as secure as protected content 
not in a virtualized environment. You should comply with all 
domestic and international laws that apply to such protected 
content. 

Содержание SignalHawk SH-36S-PC










































































































































Отзывы:

Нет отзывов