BIRD MRI3T, Руководство по эксплуатации

Страница: 25 / 70

Operation
10
Performing a Screen Shot
1. Press and hold the power and volume down buttons for approximately two
seconds will perform a screen shot of the current screen on the DPM.
Note:
The image file will be saved in the 5000-NG’s internal memory in
a folder named Screenshots.
Turning Off the Unit
1. Turn off the RF source.
Note:
Do not turn off the load fans.
2. Turn off the DPM:
a. Press and Hold the power button key for 2 seconds.
b. Select the Power off option.
Figure 7 Power Button Selection Options
3. Wait 10 minutes for the load to cool to room temperature.
4. Disconnect the AC power supply from the load.
5. Put kit components back into the case.
WARNING
Load may be hot. Allow load to cool before touching.
CAUTION
Cooling without fans running will damage load.
CAUTION
Packing foam may melt if heated. Allow load to cool before packing.