Medical MRI3T Power Measurement Kit
7
Connecting Sensor to RF Power
1. Connect the DPS Output to the load using the 7/16 to 7/16 cable provided.
Note:
The arrow on the DPS should point towards the load.
2. Connect the DPS Input to the RF source using the supplied adapters and
cables.
Figure 4 DPS RF Connections
Connecting to the DPM
1. Connect USB cable to Bird Power Sensor. See
.
2. Connect USB cable to 5000-NG.
Note:
The Bird RF Power Meter Software will save all sensor settings
(by serial number). Sensor settings will automatically load when
the sensor is connected. Settings are saved in a Session File.
Session Files are saved in the Session List.
3. The Power Sensor model number and serial number will be displayed on
the Bird RF Power Meter Software device selection screen.
Figure 5 Device Selection Screen
4. Tap the Power Sensor model number to connect to the Power Sensor.
6RXUFH
,QSXW
2XWSXW
WR/RDG
Содержание MRI3T
Страница 2: ......
Страница 4: ......
Страница 63: ...Maintenance 48 Parts List Figure 37 Supplied Items LUG...