BIOWAIR biow 100, Руководство пользователя, Страница: 9 / 36

9
R
egeneration &
L
ife
01
INSTALLATION AND TECHNICAL DATA
• Attention: The wall plugs supplied in the
assembly kit are not suitable for plaster or
plasterboard walls, specific wall plugs must
be used for these types of walls.
• Remove the support base fitted to the
equipment. You can store it or use it for
other purposes. You can even attach it to
the wall as a support shelf underneath the
CRU Biow.
• Subsequent sealing plugs must be removed.
Attach the equipment to the wall as shown in
the figure.
2x
Measurements to attach to the wall the
CRU Biow 100:
Minimumground clearance:
850 mm
Measurements to attach to the wall the
CRU Biow 60
Minimumground clearan-
ce: 850 mm
FRONT VIEW 370 mm FRONT VIEW 833 mm
Both in CRU Biow 100 and in CRU Biow 60:
Move downwards, pressing gently until it fits
into place
Direct the equipment ensuring that it always rests
on the top of the support.
ALTERNATIVE
WALL ATTACHMENT
Wall attachment
watch video
If you wish to attach the CRU Biow to the wall, an assembly kit is included, consisting of screws
(8mm wall plugs and screws). To do so, follow the steps below: