BIOWAIR biow 100 Скачать руководство пользователя страница 27

27

R

egeneration & 

L

ife  

04 

CLEANING AND MAINTENANCE

FILTER PACK CLEANING/CHANGE 
FREQUENCY

It is necessary to change the filter pack once a 

year if the maintenance and cleaning advice has 

been followed, although this time may depend 

on the environmental situation of the area and 

the use of the CRU Biow.

In people with respiratory diseases or special 

sensitivity, as well as in public spaces subjected 

to a high concentration of volatile organic 

compounds, it is advisable to change the filter 

pack every time the equipment indicates as 

such. In these cases, you should not clean the 

filter pack, but replace it directly.

HOW TO KNOW WHEN TO CLEAN/CHANGE 
THE FILTER PACK

The CRU Biow has a sensor or filter pack change 

indicator, which counts its hours of use and will 

be automatically activated when it reaches this 

parameter, advising the user to clean or change 

the filter pack.

The filter pack change indicator will be shown on 

the screen, although the CRU Biow will continue 

to work normally.

HOW TO CHANGE THE FILTER PACK

It is a very simple process, so you can dismantle 

the filter pack yourself by fully unscrewing lateral 

knobs located at the bottom of the unit.

•  Take the filter pack out of the casing.

•  Remove the black pre-filter fixed with velcro, 

wash it with water, let it dry and replace it in 

the same position.

•  Clean the HEPA filter with your vacuum 

eliminating all visible dirt.

•  If the HEPA filter is in a good condition, 

replace the black pre-filter and reset the 

equipment pressing the timer button for 

3 seconds. The filter pack indicator will be 

deactivated and will notify you again after a 

few months.

 

If, once this process has been carried out, an issue 

with the operation of the equipment is detected, 

it may be due to the fact that the filter pack is 

clogged, obstructing the passage of air due to 

accumulated dirt. Check it and replace it, even 

if the filter pack change light is not illuminated.

•  If you notice that the HEPA filter is in a bad 

condition, it is recommended to replace the 

filter pack directly.

•  You can purchase a new filtering pack by 

calling 985 87 93 45

4.2. FILTER PACK CLEANING AND REPLACEMENT

IMPORTANT

BIOWAIR TOTAL SYSTEMS

only guarantees the effectiveness 
of the BIOW equipment using filter 
packs supplied by the manufacturer.

Cleaning filter pack 

watch video

Содержание biow 100





































Отзывы: