BIOWAIR biow 100, Руководство пользователя, Страница: 5 / 36

5
R
egeneration &
L
ife
01
INSTALLATION AND TECHNICAL DATA
PRECAUTIONS
Before carrying out cleaning or maintenance, the CRU Biow must be disconnected from the wall
socket and/or equipment switch.
It is recommended that children not be allowed to handle the CRU Biow and should be supervised
by an adult.
User cleaning and maintenance must not be carried out by unsupervised children.
Children between the ages of 3 and 8 should only switch the device on/off when it has been
placed or installed in its normal operating position and when they have been supervised or given
instruction related to the safe use of the device. Furthermore, they must not plug in, adjust, and/
or clean the device or carry out any maintenance operations without adult supervision.
The use of this device is not intended for people with reduced physical or mental capabilities
unless they have been given instructions or supervision related to the use of the device by a
person responsible for their safety.
Some parts of this product can get hot and cause burns. Special attention should be paid when
children and vulnerable people are present.
The device should not be powered through an external switching device, such as a timer, nor
should it be connected to a circuit that is regularly switched on and off by the power distribution
company.
Do not handle the equipment with damp or wet hands.
Do not obstruct the flow of air, this can lead to poor cooling of the equipment.
The switch must be free at all times so that it can be accessed immediately if necessary.
WARNINGS
To avoid overheating, do not cover the equipment and do not place it immediately under a power
outlet.
Do not install in bathrooms or other damp rooms.
If you notice any malfunctioning in the electronics of your Biow, unplug it or turn it off with the
switch on the right side for one minute and turn it on again to reset the electronics and get it
working properly again.
Do not operate the device if you notice any wear on any component or cable. If this happens,
please inform technical support.