BIOWAIR biow 100, Руководство пользователя, Страница: 12 / 36

12
R
egeneration &
L
ife
02
CRU BIOW OPERATION
2.4. PROGRAMMING AND FUNCTIONALITIES
The following table summarizes the use and functionalities of the equipment using the remote
control:
BUTTON DESCRIPTION FUNCTION
POWER - ON / OFF The equipment must be connected to the network and
the switch must be in the ON position.
MODE
MANUAL It enables customized configuration, meaning the user
is able to select:
Speed, UV, ION, Heat and Timer.
The display will always be on regardless of ambient
light.
The speed is selected without taking pollution into
account:
V SILENT VWHITE , V2 y V3
MODE
AUTO
In this mode, the equipment operates automatically
depending on the level of particles and the light
intensity of the room.
If there is light:
• Speed according to need, depending on the
concentration of particles in the room.
• ION/UV selectable.
If there is not enough light:
• V SILENT
• ION/UV OFF
MODE
NIGHT Customized configuration (same as in MANUAL mode),
promoting rest:
If there is light: Dimmed display.
If there is not enough light: Display off after 15 seconds.
MODE
WIFI 100% customizable programming by hours, available
after linking the device through the BIOWAPP: Speed,
UV, ION, Heat, +Protect.
THERMAL
TREATMENT –
HEAT FUNCTION Activates thermal treatment allowing a greater
protective function against microorganisms. It
facilitates an increase the room temperature in a range
of 16-32 ºC, using the + and - buttons. The selected
temperature will be displayed in yellow to differentiate
it from the actual room temperature.