Operation Manual BioSmart PV-WM v.029.1|03.2021|en
Page 7 of 24
BioSmart PV-WM Reader
Operation Manual
is found or the access settings prescribe to deny passage, then the controller performs other actions specified
in the working model. For example, BioSmart UniPass controls the sound signal on the reader.
Detailed information about operating modes is given in User Manual BioSmart UniPass.
The LED indicator displays the current reader status (see Figure 3).
Figure 3
–
The reader LED indicator
The following display modes are set by default:
blue flashing
- palm / card standby mode;
red single
- notification about unsuccessful identification;
red
flashing
-
there is no connection with the BioSmart UniPass controller or the reader is “not
tied” to the controller;
green single
- notification about successful identification;
green
flashing
- firmware is being flashed (written) to the reader.
The reader board contains terminals for connectors for connecting power, external devices, as well as
LED indicators and switches.
A picture of the reader board is shown in Figure 4.
LED
Indicator
