5
2.3.
DURING OPERATION
Do not operate the unit in environments with aggressive or explosive chemical
mixtures. Please contact manufacturer for possible operation of the unit in specific
atmospheres.
Do not operate the unit if it is faulty.
Always have the cover protecting against aerosol spread (hereinafter protective
cover) installed during operation.
Do not operate the unit if any of the needles is clogged or malfunctions.
Never touch the needles or place fingers or other parts under the needles during
operation. Manifold needles are sharp and can cause injury.
Always switch off the unit before changing the manifold.
If liquid spills on the guiding rail, stop the operation, clean and wipe the surface dry.
Do not allow the waste bottle to overflow the maximum level during operation (there
is a mark on the side surface of the bottle). Take necessary precautions utilizing
waste liquid in accordance with general laboratory standards.
2.4.
AFTER OPERATION
Сarry out the cycle of system washing with distilled water and do not dry. This will
keep the system in permanent operation condition. Follow instructions outlined in
section
6. Operation closedown
of this manual.
Clean the guiding rail under the platform and wipe it dry to prevent oxidation layer
formation and to prolong working life of the unit.
2.5.
BIOLOGICAL SAFETY
It is the user’s responsibility to carry out appropriate decontamination if hazardous
material is spilt on or penetrates into the equipment.
In diagnostic researches, potentially dangerous biological materials can be used.
When working with such materials, always use protective clothing and eye protection.
Always have the protective cover installed during operation.
