Bioquell ProteQ, Руководство пользователя

Страница: 8 / 58

BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 8 of 58
Aeration unit warning label and its meanings
DO NOT STAND HERE
Do not stand on the
aeration unit
ELECTRICAL INJURY
HAZARD
Only trained personnel
should be accessing the
internal PCB/power supply
area.
2 UNPACKING INSTRUCTIONS
This ProteQ is supplied in one large box on a pallet:
1. Cut the retaining straps and remove the lid from the box.
2. Remove the small boxes containing the hand held instruments.
3. Remove the large outer sleeve by lifting it up and over the unit.
4. Lower the ramp.
5. Carefully cut open the silver bag.
6. Carefully, with two people, wheel out the ProteQ down the ramp.
Charge the hand held low level H
2
O
2
sensor as soon as it is unpacked, if
supplied. The sensor, charger and information booklet are contained in
separate small white boxes; see Section 17 of the manual on sensor
charging.
WARNING: Two people are required to safely remove the system
from the pallet.
WARNING: The ProteQ module weighs 87kg (192lbs). Appropriate
lifting procedures should be followed.