Biontech BTM-105DN, Руководство по эксплуатации

Страница: 23 / 40

23
9. How to Use Water Purification
Method
Supply water by pushing the POWER button.
* The supply Power lamp will turn on.
* When water is supplied, the machine
automatically selects the previously set alkaline
step and water can be taken.
Make sure the alkaline step selection lamp turns on.
Push the PURIFY button.
(The machine supplies water that has not been
electrolyzed.)
Take the purified water.
Stop the machine by pushing the POWER button.
(To protect the machine, do not stop the machine for
2 seconds after water supply begins.)
* Audio "Crystal Clear Water in Production."
When the machine is powered up and water begins to be supplied at the previously set step, the
machine notifies with an audio announcement. If you push the PURIFY button at this time, the
machine will notify with the audio announcement as above for purified water.
■ If you use the machine in the purification mode and turn it off and on again, the machine will be
automatically set to the previously selected alkaline step.
Purified water comes out of the
alkaline water outlet faucet.
Purified water comes out of the
acidic water outlet faucet.
ACID ALK PU