Biontech BTM-105DN, Руководство по эксплуатации

Страница: 13 / 40

13
Development Drawing of Raw (City)
Water Connection.
(Dust Filter)
Reduce Valve
NIPPLE
Safety pin
Safety pin
Safety pin
Adaptor(Small)
Water Flow
control screw
Control using by
driver
Increase Decrease
Hose
1) 1/4 Hose (Tubes:PE)
2) Gripper cap
3) Gripper Ring (STS)
4) Collets
5) O-ring (NBR)
6) Body (POM)
- Cut 1/4 hose vertically before
inserting.
- 1/4 hose should be clean &
without any flaw.
- During insertion, completely put to
push till stop side of 1/4 hose
deeply although there feels
suspended in the middle.
- Slightly pull 1/4 hose to be sure to
set to hold correctly.
- Collets Stainless teeth prevent
from breakaway & O-ring prevent
from leak.
- Inserting safety pin between
collets surrounding 1/4 & body
not to breakaway.
- Put to push collets surrounding
1/4 toward body not to have any
interval between them and pull
1/4 hose to disassemble Fitting.
3 . c i P 2 . c i P 1 . c i P
6 . c i P 5 . c i P 4 . c i P
Hose
Hose
( )
(O)
How to assemble & disassemble one touch fitting
- Must use to cut the edge of
damaged hose for recombination
after desorption.
<How to connect & caution>
1. Connect adaptor to water pipe and combine fitting with entrance nipple of tap water of BTM-105D.
2. Combine hose on two touch fitting of adaptor and connect the other side of hose with filter DUST
Filter's.
3. Completely insert hose to the end of one touch. If don's insert to the end, it may cause to leak.(pic.2)
4. After installing product, if water flow is more decreased or increased than standard, please control to be
standard using by adaptor water supply control valve.
While using the water ionizer, the power could not be turned on
occurs by the source water no pass though the contaminants
accumulate in the dust filter and filter strainer. At that time, please
wash up the filter strainer and the dust filter after remove from the
Water Inlet Elbow with flowing water.
After 2 or 3 years using the water ionizer, we do
recommend you to replace all related connecting
parts to new ones as the shown on the left side box.
- Unless, some malfunctions of the product can
occur.
Dust Filter
Dust Filter
Adaptor(Small)
Dust Filter
Hose(1/4")
Dust Filter