Biontech BTM-105DN, Руководство по эксплуатации

Страница: 22 / 40

22
8. How to Produce Alkaline
Ionized Water
Supply water by pushing the POWER button.
* The water supply Power lamp will turn on.
* When the Solenoid valve opens and ionized
water is available, the alkaline level selection
lamp will turn on.
Make sure the alkaline level selection lamp turns on.
Set the alkaline level of your choice by pushing the
ALKALINE button.
* Every time you push the ALKALINE button,
alkalinity increases a level higher.
Take the alkaline ionized water.
(Check that acidic ionized water is supplied from
the acid water outlet.)
After taking the water, stop the machine by
pushing the POWER button.
(To protect the machine, do not stop the machine for
2 seconds after water supply begins.)
* Power supply is automatically cut off once taking
of water ceases.
Audio notification "Alkaline ionized Water on Process".
When the machine is powered up and water begins to be supplied at the previously set
step, the machine notifies with the audio announcement as above.
■ If you use the machine at Level 5 (strong alkaline) and turn it off and on again, the machine
will be automatically set to the alkaline step you selected prior to Level 5.
Do not operate the machine at Level 5 (strong alkaline) for an extended period of time.
Depending on the quality of water supply, the machine will shut down automatically to
protect itself.
- It is not a malfunction.
Alkaline ionized water
comes out of the alkaline
water outlet.
Acidic ionized water comes
out of the acidic water
outlet. Do not drink.
ACID ALK PU