Biontech BTM-105DN, Руководство по эксплуатации

Страница: 18 / 40

18
Adjust the throughput
Adjust the throughput according to the following steps:
■ If water pressure is too low, you may not be able to obtain sufficient throughput.
(In cases when water pressure is lower than 1
kgf
/ cm
2
.)
In this case, the lifespan of the filter may be shortened. Notify the customer of this fact.
■ If the throughput is low due to low water pressure, do not attempt electrolysis.
No lamp lights up on the control
panel after the product is plugged in.
No water comes out of the acid
water outlet faucet.
There is water leakage.
Water keeps coming out despite
pressing the POWER button
No water comes out after
pressing the POWER
button
The product responds abnormally to
button operation or does not
respond at all.
Is the connector of the control panel cord
completely connected?
* Is the acidic water hose bent?
* Is water throughput too low?
Are all parts completely connected?
Is the connector of the control panel cord
completely connected?
* A few drops from the alkaline or acidic
ionized water out faucet is not a sign of
machine malfunction.
* A foreign substance clogging up the
built-in Solenoid valve may prevent water
stoppage.
Are all parts completely connected?Is the
connector of the control panel cord completely
connected?
Is the connector of the control panel cord
completely connected?
Supply water to the product by pushing the POWER button.
Adjust the throughput by rotating the valve adjustment screw.
(Adjust the throughput so that a 200
㎖
cup can be filled in 3 to 5 seconds.)
Set the product at normal operation conditions.
①
②
③
Operation Precautions
Problem Countermeasure (Checkpoint)