053
7
Your meter kit comes with two AAA, 1.5volt, batteries uninstalled. New set of batteries will provide
power to perform about 1000 tests under normal use. The low battery symbol " " will keep
appearing on your display if your batteries run low. Please keep spares on hand and replace the
batteries soon when
a battery symbol appears.
The meter will automatically turn off after 3 minutes of nonuse to save battery power. Your test
memories are still saved.
Batteries Installation
21
20
Batteries Installation
4. Meter will do the self test and the whole screen will keep
blinking as soon as the batteries are installed.
5. Press any button to close the running-test of the meter, and
enter setting mode.
6. Please set time and date when the batteries are replaced.
See Setting the Time, Date and Unit on page 23.
PRECAUTION
- Danger of explosion might happen if battery is incorrectly replaced; replace only with the
same or equivalent type.
- Please follow the local regulation and discard used battery properly.
1. Turn the meter over.
Press and push battery
cover to open.
2. Install both batteries at once.
Be sure to put battery in
correct direction.
3. Slide the battery cover back
until it snaps into place.
B
a
t
t
e
r
y
+
-
B
a
t
t
e
r
y
+
-
B
a
t
t
e
r
y
+
-
B
a
t
t
e
r
y
+
-
053
7
