Irys® User Guide
07/10/2015
9
For Research Use Only. Not Intended For Diagnostic Purposes.
Irys Exterior
Figure 1: Irys Exterior
Front
Touch Screen Monitor: perform instrument configuration and run setup. The graphical user interface touch screen
monitor has been designed with large buttons and follows an easy workflow facilitating
the instrument’s operation
and run execution.
Sample Loading Door and XY Stage: The sample loading door is accessible during the workflow using the touch
screen monitor, and can be manually opened.
Right Side
Power button: The ON/OFF button is located on the right-hand-side of the instrument.
USB: Two USB 2.0 ports are located on the right-hand-side next to the power button. Field Service Engineers
periodically use USB to perform instrument software updates.
Figure 2: Right-side view of Irys showing USB ports and power button
Rear Panel
Power Connectors: Irys requires a single 100 to 240 VAC/50 to 60 Hz (+/- 10%) rated at 1.5KVA power connection
with a dedicated ground. The main power switch and the power source connection are located on the rear panel.
The main power switch must be turned to the ON position before the power button on the right-hand-side of the
instrument can operate.
