Irys® User Guide
20
7/10/2015
For Research Use Only. Not Intended For Diagnostic Purposes.
Chapter 4 Performing a Run
1. After selecting the user, press the Forward arrow button to proceed to the Load Sample screen.
Note:
There will be a delay in going from the Select User screen to the Load Sample screen while the
system calibrates.
2. The XY Stage will eject and the Objective will rise.
Figure 12: Proceed to Load Sample Screen
4.1 Loading the Sample
Once the XY Stage is fully ejected, place the empty IrysChip onto the XY Stage cutout with the label side up. There
is only one orientation. Secure the IrysChip in place by sliding the lock bars over the corners of the chip.
Figure 13: Load IrysChip
