manualshive.com logo in svg

BioCare Medical intelliPATH FLX, Руководство пользователя, Страница: 10 / 58

Поделиться
Скачать
BioCare Medical intelliPATH FLX Скачать руководство пользователя страница 10

7

Safety Precations

The intelliPATH is designed for use with formalin-fixed tissue samples or non-infectious cell smears. Fresh (unfixed) 
tissue or cell smears may contain infectious organisms. Use only tissue sections or cell smears that have been fixed in a 
biocidal/virocidal/fungicidal fixative. Infectious sample use is limited to tissues/specimens that are specified on Biocare’s 
product  datasheets.  Handle  control  slides  and  test  formalin-fixed  paraffin-embedded  (FFPE)  slides  as  if  capable  of 
transmitting infectious agents, and dispose with proper precautions. It is recommended that the specimens are handled 
using established good laboratory working practices.

Reagents and Chemicals

Some of the reagents and chemicals recommended by Biocare for use on the intelliPATH are hazardous. They 
must always be used according to the manufacturer’s instructions and good laboratory practices. Always wear 
gloves, eye protection and a protective lab coat when handling any chemical solution used on the automated 
slide stainer, and when cleaning the equipment or emptying waste carboys. Obtain a Safety Data Sheet (SDS) 
from the manufacturer for each chemical constituent. Do not use any flammable chemicals on the intelliPATH 
automated slide stainer. Danger from hazardous fumes, fire or explosion may result with the possibility of injury 
to the operator or damage to the instrument. Maintenance and cleaning procedures may recommend the use 
of flammable chemicals. These procedures specify solutions with concentrations below the flash point of the 
chemicals and are to be used only when the instrument has been disconnected from the power source.

Instrument

Use only the authorized software program that is supplied with the instrument, or authorized updates.

Do not install any other software applications onto the intelliPATH dedicated computer system. This may cause 
unexpected operation of the stainer or corrupt the operating software and will void the instrument warranty.

Do not switch off power to the computer until the intelliPATH program is properly closed.

Do not turn off power to the automated slide stainer until all motion has stopped and the robotic arm is in the 
home position.

The front door of the instrument must be closed before operation will begin.

Keep carboy assemblies below the level of the stainer.

Proper cleaning is important for the reliable operation of the instrument. Follow the recommended cleaning 
procedures in the System Cleaning chapter (page 49).

The robotic arm must be stopped before the instrument door can be opened. The system door status can be 
observed from the intelliPATH software screen.

Programming Cautions

Errors in programming staining protocols could cause false positive or false negative results. If such errors occur, 
check  the  programming  first.  The  intelliPATH  provides  the  option  to  enter  patient  information  for  each  slide. 
Make sure to enter the correct information for patient, physician, etc., for each slide to prevent misidentified and 
incorrectly reported results.

Содержание intelliPATH FLX



























































Отзывы:

Нет отзывов