BinTec X5800, Руководство по установке

Страница: 45 / 58

X8500 Einbauanleitung / Installation Guide 45
Equipping the Module Carrier Card with Communications Module(s)
2
2.2 Equipping the Module Carrier Card with
Communications Module(s)
This chapter describes the communication modules available and how you
equip your X8E-2BC carrier card with the BIANCA/BRICK communications
module(s).
2.2.1 Communication Modules Available
The following BIANCA/BRICK communications modules are available for the
X8E-2BC carrier card (for detailed information on the functions, refer to the
X8500 Hardware Installation Guide and to the BIANCA/BRICK-XM or BIAN-
CA/BRICK-XL2 User’s Guides):
■
CM-BRI: ISDN communications module with Basic Rate interface for two B-
channels.
■
CM-2BRI: ISDN communications module with two Basic Rate interfaces for
four B-channels.
■
CM-PRI: ISDN communications module with Primary Rate interface for 30
B-channels (hardware revision 2.0 and newer).
■
CM-X21: WAN communications module with X.21 interface for up to
2 Mbps serial communication in X.25 environments (Versions since No-
vember 2001; PROM labeling CM-X21 U1 V.1.2.1).
■
CM-100BT: Fast Ethernet LAN communications module for Ethernet (10/
100 Mbps) with Auto Sensing.
2.2.2 Instructions
The X8E-2BC carrier card can be fitted with a maximum of two BIANCA/BRICK
communication modules.