X8500
Einbauanleitung / Installation Guide
55
Installing the Expansion Cards
2
➤
Draw the expansion card out of the slot as shown in
figure 2-10, page 53
.
Prepare the new expansion card
➤
Have the new expansion card ready for installation (take it out of the anti-
static bag).
Check if you require any additional installation on the expansion cards, like
for example the installation of resource module(s) (see
chapter 2.1,
page 39
) or the installation of BIANCA/BRICK communications modules
(see
chapter 2.2, page 45
).
Plug in the expansion card
➤
Insert the expansion card into the selected slot until the red status LED is
on (not for X8A-SYS, X8A-SYS-VPN or X8E-2BC).
➤
Push the expansion card further until the amber colored status LED is on
(not for X8A-SYS, X8A-SYS-VPN or X8E-2BC).
Card guides ensure that the expansion card is reliably inserted.
➤
Push the expansion card further until it reaches the slot connector.
Caution!
Forcing the expansion cards into the slots can damage the card
or slot connector.
➤
Do not force the expansion cards into the slots.
The system card (X8A-SYS or X8A-SYS-VPN) must be installed
in the system card slot (fifth slots from the left). Slots 1 to 4 and 5
to 8 are provided for the expansion cards (for numbering of slots,
see chapter "
X8500
Basic Unit" in the
X8500
Hardware Installa-
tion Guide).
For optimal performance of
X8500
, slots 5 to 8 should be fully
equipped with expansion cards before slots 1 to 4 are used!
Содержание X5800
Страница 4: ...4 BinTec Access Networks GmbH...
Страница 34: ...34 BinTec Access Networks GmbH...
