Installation
2
42
BinTec Access Networks GmbH
2.1.3
Equipping Expansion Card with XT-2SYNC
The expansion card X8E-2SYNC can be fitted with the XT-2SYNC resource
module.
Proceed as follows:
➤
Take the resource module(s) out of the antistatic bag.
Removing screw and dummy front panel:
Figure 2-3:
Prepare X8E-2SYNC expansion card
➤
Remove the M3 screw from the spacer pin of the expansion card (1,
figure 2-3, page 42
).
You will need the M3 screw again to fasten the XT-2SYNC resource mod-
ule to the expansion card.
➤
Remove the M2.5 screws (3,
figure 2-3, page 42
) and remove the dummy
front panel from the expansion card (2,
figure 2-3, page 42
).
1
M3 screw and spacer pin
2
Dummy front panel
3
M2.5 screws
1
2
3
3
Содержание X5800
Страница 4: ...4 BinTec Access Networks GmbH...
Страница 34: ...34 BinTec Access Networks GmbH...
