BinTec elmeg T484 Скачать руководство пользователя

Страница: 53 / 85

#782

Lift up hand set

Ack. sig nal

Re pla ce hand set

De le ting aut ho ri za ti on for re mo te ser vi ce ac cess

You can can cel a pro gram med re lea se for in co ming re mo te ac cess any time you want. Ho we ver, an exi sting con nec ti -

on to a ser vi ce cen ter is not ter mi na ted.

#799

Lift up hand set

Ack. sig nal

Re pla ce hand set

Set ting fea tu res using a te le pho ne

Af ter you be gin con fi gu ra ti on you can set the fea tu res for your sys tem using the codes des cri bed here. The te le pho ne

being used for pro gram ming can not be rea ched whi le the sys tem is being con fi gu red.

You will hear the po si ti ve ac knowled ge ment sig nal once you suc cess ful ly con clu de con fi gu ra ti on for a set ting. You

can then move on to con fi gu re the next set ting. If you wait for more than 40 se conds bet ween one en try and anot her,

the PABX will ter mi na te con fi gu ra ti on and you will hear the busy sig nal. All in put made up to that point which was

con clu ded with a po si ti ve ac knowled ge ment sig nal will be sa ved when you hang up the hand set. Sa ving is per for med

for 10 se conds af ter you hang up the hand set. Du ring this pe ri od it is im por tant that you do not be gin a new con fi gu -

ra ti on of the sys tem, and that po wer is not in ter rup ted to the sys tem.

You must perform the following procedure at the beginning of each subsequent configuration process.

====

Lift up hand set

Ack. sig nal

En ter PIN 1

Ack. sig nal

Chan ging PIN 1 or PIN 2

You can pre vent mi su se of your PABX by ot her par ties by im ple men ting va ri ous se cu ri ty functions. Your PABX set -

tings can be pro tec ted using your 4-di git PIN1 (code num ber). Ac cess by ex ter nal par ties (re mo te ac cess) is pro tec ted

using your 6-di git PIN2.

PIN 1 (4-di git): Se cu ri ty pre cau ti on against mi su se of your PABX by ot her par ties.

PIN1 is a 4-di git code num ber that is re qui red when you wish to pro tect your sys tem set tings against un aut ho ri zed
ac cess.

PIN 2 (6-di git): Se cu ri ty for set tings made from ex ter nal te le pho nes

For the set tings:

Call for war ding (Fol low me) from ex ter nal lo ca ti on

Room mo ni to ring from ex ter nal lo ca ti on

pre vent un aut ho ri zed par ties from using your PABX. Only af ter you en ter this 6-di git PIN2 are you al lo wed to uti li ze

functions in your PABX that can be ac ti vat ed/de ac ti vat ed from ex ter nal te le pho nes.

Note
Re mo te ac cess using this 6-di git PIN2 is only pos si ble when this PIN2 has been chan ged in di vi du al ly, i. e. it is no
lon ger in its in iti al set ting of 000000.

Set ting fea tu res using a te le pho ne

Con fi gu ring per for man ce fea tu res using a te le pho ne

Содержание elmeg T484






















































































Результаты поиска

Содержание elmeg T484

Отзывы:

Похожие инструкции для elmeg T484

Бренды по названию

Популярные бренды

BinTec elmeg T484, Руководство по эксплуатации

Результаты поиска

Содержание elmeg T484

Отзывы:

Похожие инструкции для elmeg T484

Бренды по названию

Популярные бренды