BinTec elmeg T240, Руководство по эксплуатации

Страница: 74 / 84

Fault Des crip ti on Pos si ble Cau se Fault Re me dy
Room in qui ry not
pos si ble du ring an
ex ter nal call.
The telephone’s flash key is
not pro per ly con fi gu red.
Check the set ting of your telephone’s flash key. »Flash key«, flash in ter val 80-120
ms.
At ten ti on: In qui ry calls are not pos si ble with pul se dia ling te le pho nes.
If the PABX is con nec ted at the USB port of the PC and re cog ni zed by the PC the USB LED on the PABX will light up. If not, the USB
ports of the PC are not ac ti vat ed / faul ty, or the dri vers for the PABX are not in stal led.
The sa me cau ses and re me dies are pos si ble as des cri bed for the pre vi ous pro blems (no in ter nal/ex ter nal con nec -
tions pos si ble).
No con nec tions can
be estab lis hed via
the PABX’s
USB-port.
The USB ports of the PC are
not ac ti vat ed or are de fec ti -
ve.
In the sys tem con trol pa nel (fol der »Sys tem« - »De vi ce ma na ger«) check whet her
the USB ports of your PC ha ve been ac ti vat ed.
PABX dri vers not pro per ly
loa ded.
In the sys tem con trol pa nel (fol der »Sys tem« - »De vi ce ma na ger«) check whet her
the PABX has been in stal led cor rect ly. A ques ti on mark in front of the en try for the
PABX in di ca tes in cor rect ly in stal led / loa ded.
Plug the USB con nec tor for the PABX sys tem back in to the PC or res tart your PC.
No au to ma tic
call-backs pos si ble.
No pabx num ber has been
en te red with a
point-to-point ac cess.
Whi le con fi gu ring your pabx sys tem with the PC, ma ke this en try un der Ex ter nal
Num bers.
In voi cing for your
Char ge Ma na ger is
set too high or too
low by one fi xed fac -
tor.
Trans fer of the cur ren cy
amount is set for your
ISDN con nec ti on ins te ad of
trans fer of ta riff da ta.
Ap ply for the pro ce du re you wish to ha ve, or chan ge the ta riff unit fac tor in the
Char ge Ma na ger and in the Pro fes sio nal Con fi gu ra tor (see al so Pa ge 31).
Trou bles hoo ting
66