NCR-80 Four-wire 4-20 mA/HART
925-0332 Rev B
6 Set up the sensor with the display and adjustment module
49
In this menu item, the hardware and software version of the sensor is displayed.
In this menu item, the date of factory calibration of the sensor as well as the date of the last
change of sensor parameters are displayed via the display and adjustment module or via the
PC.
In this menu item, the features of the sensor such as approval, process fitting, seal, measuring
range, electronics, housing and others are displayed.
6.6 Saving the parameter adjustment data
We recommended noting the adjusted data, e.g. in this operating instructions manual, and ar-
chiving them afterwards. They are thus available for multiple use or service purposes.
If the instrument is equipped with a display and adjustment module, the data in the sensor can
be saved in the display and adjustment module. The procedure is described in the menu "
Addi-
tional adjustments
" in the menu item "
Copy device settings
". The data remain there permanently
even if the sensor power supply fails.
The following data or settings for adjustment of the display and adjustment module are saved:
●
All data of the menu "
Setup
" and "
Display
"
●
In the menu "
Additional settings
" the items "
Sensor-specific units, temperature unit and lin
-
earization
"
●
The values of the user programmable linearization curve
The function can also be used to transfer settings from one instrument to another instrument of
the same type. If it is necessary to exchange a sensor, the display and adjustment module is
inserted into the replacement instrument and the data are likewise written into the sensor via the
menu item "
Copy device settings
".
