Binder 9020-0366 Скачать руководство пользователя страница 12

Страница: 12 / 95

KBF-S / KBF-S-UL (E6) 11/2021

page 12/95

WARNING

Danger of injury and damages by the chamber tipping over or breakaway of the pro-

truding lower housing cover.
Injuries and damage to the chamber and the loading

material

∅

Do NOT load the lower housing cover with heavy objects while the chamber door is

open and do NOT climb on it.

1.8 Intended use

Following the instructions in this operating manual and conducting regular maintenance work

(chap. 22) are part of the intended use.

Any use of the chambers that does not comply with the requirements specified in this Operating

Manual shall be considered improper use.
Other applications than those described in this chapter are not approved.

Use

Constant climate chambers series KBF-S / KBF-S-UL are suitable for exact conditioning of harmless ma-

terials.

Requirements for the chamber load

Any solvent must not be explosive and flammable. A mixture of any component of the charging material

with air must NOT be explosive. The operating temperature must lie below the flash point or below the

sublimation point of the charging material. Any component of the charging material must NOT be able to

release toxic gases.
The loading material shall not contain any corrosive ingredients that may damage the machine components

made of stainless steel, aluminum, and copper. Such ingredients include in particular acids and halides.

Any corrosive damage caused by such ingredients is excluded from liability by BINDER GmbH.
The chamber does not dispose of any measures of explosion protection.

DANGER

Explosion or implosion hazard and danger of poisoning through the introduction of

unsuitable loading material.
Poisoning. Serious injury or death from burns and / or explosion pressure.

∅

Do NOT introduce any substance combustible or explosive at working temperature into

the chamber, in particular no energy sources such as batteries or lithium-ion batteries.

∅

NO explosive dust or air-solvent mixture in the inner chamber.

∅

Do NOT introduce any substance which could lead to release of toxic gases.

Содержание 9020-0366
































































































Результаты поиска

Содержание 9020-0366

Отзывы:

Похожие инструкции для 9020-0366

Бренды по названию

Популярные бренды

Binder 9020-0366, Руководство по эксплуатации

Результаты поиска

Содержание 9020-0366

Отзывы:

Похожие инструкции для 9020-0366

Бренды по названию

Популярные бренды