43
7.4
Base Settings
This operation should only be necessary if one of your cordless handsets
You will need to enter the 4-digit system PIN (Default PIN is 0000) in order
to de-register a handset from the base station. A de-registered handset will
have the antenna flashing and --UNREG-- on the display.
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU/OK> and <UP/DOWN> to select BS SET.
2. Press <MENU/OK> and <UP/DOWN> to select DEL HS.
3. Press <MENU/OK> and the display shows PIN?---
4. Enter the 4-digit system PIN.
5. Press <MENU/OK> and the first handset number is displayed.
6. Press <UP/DOWN> to step through the list of registered handsets, and
select the numbe of the handset you want to de-register.
7. Press <MENU/OK> to confirm, and the chosen handset will be
de-registered.
7.4.
1
De-register a Handset
becomes faulty or lost and needs to be replaced.
You should normally leave the Dial Mode at its default setting of TONE (also
called DTMF) unless the phone is connected to an old exchange that only
recognises PULSE dialling.
Note:
If PULSE dialling is set, you can press the * key to switch to TONE
7.4.
2
Change the Dial Mode
dialling for the rest of that call.
1. Press <MENU/OK> and <UP/DOWN> to select BS SET.
2. Press <MENU/OK> and <UP/DOWN> to select DIALMODE.
3. Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE.
4. Press <MENU/OK> to confirm.
