6. Press <UP/DOWN> to browse the ring tone list. The respective ring
tone will be played when browsing the ring tone list. (Note: the
selected ring tone will only play when you receive a call if you
subscribe to Caller Display and the incoming number matches the
7. Press <MENU/OK> to confirm the selected ring tone and to save
the entry.
1. Follow Steps 1 and 2 in section 4.10.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE.
3. Press <MENU/OK> to confirm and the entry will be deleted.
Delete a Redial Number
4.10.3
1. Follow Steps 1 and 2 in section 4.10.1.
2. Press <MENU/OK> and <UP/DOWN> to select DEL ALL.
3. Press <MENU/OK> to display CONFIRM?
4. Press <MENU/OK> again to confirm.
All entries will be deleted and the display will show EMPTY.
Delete all Redial List entries
4.10.4
23
Using the corded base:
4.11
Make an External Call
4.11.1 Preparatory dialling
Enter the phone number and lift up the corded handset or press
<SPEAKERPHONE> to dial the number. When entering the number, if
you make a mistake, press <C/MUTE> to delete digits.
Note:
To insert a pause in the dialling sequence, press and hold the < 0 >
button, the screen will then show a
“P”
in the number.
4.11.2 Direct dialling
Lift up the corded handset or press <SPEAKERPHONE> to connect to
digit you cannot correct it with the <C/MUTE> key.)
the line and then enter the phone number. (Note: if you enter a wrong
Press <FLASH> to insert a recall (flash) signal and the screen will
4.11.3 Call from the phonebook
Press <PHONEBOOK> to access the phonebook and press <UP/DOWN>
Lift up the corded handset or press <SPEAKERPHONE> to dial out the
selected phonebook entry.
to select the desired phonebook entry.
stored number.)
show a "F".
