32
1. Press <MENU/OK> to show CONTACTS and then press <MENU/OK>
to enter the contacts list.
2. Press <MENU/OK> and <UP/DOWN> to select FASTDIAL .
3. Press <MENU/OK> and <UP/DOWN> to show the digit key from 2 to 9
that you want to set. Then press <MENU/OK> to select it.
If EMPTY is displayed briefly, there is no number stored in the selected key:
4. Press <UP/DOWN> to select an entry from the contacts list.
5. Press <MENU/OK> to save the new number in the selected fastdial key.
OR if a name displays, there is already a number stored in the selected key:
4 . Press <MENU/OK> to select EDIT.
5. Press <MENU/OK> and then <UP/DOWN> to select an entry from the
contacts list.
6. Press <MENU/OK> to save the new number in the selected fastdial key.
5.8
Set the Fast Dial Numbers
5.8.1
Add or Edit a Fast Dial Number
1. Repeat the steps 1 to 3 in section 5.8.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE.
3. Press <MENU/OK> to confirm the delete.
5.8.2
Delete a Fast Dial Number
Up to 8 of your Contact entries can be allocated to a fast dial key (from 2 to
9), where you can dial the number from idle mode by simply pressing and
holding the appropriate digit key for more than 2 seconds. If no fast dial
number is stored, you will hear a double-beep tone when the key is held
down.
Using the corded base:
5.9
In idle:
1. Press <MENU/OK> to show
PHONEBOOK
.
2. Press <MENU/OK> and <UP/DOWN> to show
.
3. Press <MENU/OK> and the display will show the cursor at the
4. Key in the name using the digit keys (maximum 12 characters). If you
make any mistakes, press <C/MUTE> to delete the last character.
5.
Press <MENU/OK> and the cursor will move to the beginning of the
number position.
beginning of the name position.
6.
Key in the number using the digit keys (maximum 20 digits). If you make
any mistakes, press <C/MUTE> to delete the last digit.
ADD
Add a New Entry
