24
4.11.4 Call from the call log
Press <CALLS> to access the Call Log and press <UP/DOWN> to select
the desired Call Log entry. Lift up the corded handset or press
<SPEAKERPHONE> to dial out the selected Call Log entry.
4.11.5 Call from the redial list
Press <DOWN / REDIAL> to access the redial list and press <UP/DOWN>
<SPEAKERPHONE> to dial out the selected redial number.
to select the desired redial number. Lift up the handset or press
4.11.6 Call timer
Your base display automatically times the duration of every call. The call
timer appears on the display as soon as a call is answered or about 15
seconds after dialling, and remains on the screen for a few seconds after the
end of the call. It is shown in hours, minutes and seconds format
(HH:MM:SS).
4.12
Answer a Call
When there is an incoming ring, pick up the handset or press
<SPEAKERPHONE> to answer the call.
4.13
4.14
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of
During a call:
Press <UP/DOWN> to increase or decrease the volume level respectively.
The current setting is shown. When you end the call, the settings will remain
at the last selected level.
the earpiece and speaker volumes.
During a call connection, put the corded handset on the base station to end
Or press <SPEAKERPHONE> if you have a call in handsfree mode.
the call.
End a Call
Adjust Earpiece and Handsfree Volume
4.15
During a call, you can activate the audio boost feature to increase the
Audio Boost feature
earpiece volume of the corded handset by pressing <HANDSET BOOST>,
"
BOOSTER ON
" displays on the screen. To cancel it, press
<HANDSET BOOST> again, and the screen displays "
BOOSTER OFF
" for
around 2 seconds before going back to the normal call mode.
The audio boost feature will be turned off automatically when the call is
ended or if it is switched to handsfree mode.
