Billion BiPAC 8700VAX(L)-1600, Руководство пользователя

Страница: 283 / 327

278
Static Route
With static route feature, you can control the routing of all the traffic across your network. With each
routing rule created, you can specifically assign the destination where the traffic will be routed.
Above is the static route listing table, click
Add
to create static routing.
IP Version:
Select the IP version, IPv4 or IPv6.
Destination IP Address / Prefix Length:
Enter the destination IP address and the prefix length. For
IPv4, the prefix length means the number of ‘1’ in the submask, it is another mode of presenting
submask. One IPv4 address,192.168.1.0/24, submask is 255.255.255.0. While in IPv6, IPv6
address composes of two parts, thus, the prefix and the interface ID, the prefix is like the net ID in
IPv4, and the interface ID is like the host ID in IPv4. The prefix length is to identify the net ID in the
address. One IPv6 address, 3FFE:FFFF:0:CD30:0:0:0:0 / 64, the prefix is 3FFE:FFFF:0:CD3.
Interface:
The exit interface of local router to the next hop.
Gateway IP Address:
Enter the gateway IP address/ the entry address of the next hop,
Metric:
Metric is the hops from local to destination, which signals the quality of the link, to determine
the optimal route. Enter one number greater than or equal to 0.
Click
Apply
to apply this route and it will be listed in the route listing table.