Billion BiPAC 8700VAX(L)-1600, Руководство пользователя

Страница: 155 / 327

150
service provider is able to attach anything to an APN to create a data connection, requirements for
APNs varies between different service providers. Most service providers have an internet portal
which they use to connect to a DHCP Server, thus giving you access to the internet i.e. some 3G
operators use the APN ‘internet’ for their portal. The default value is “internet”.
Username
/
Password:
Enter the username and password provided by your service provider. The
username and password are case sensitive.
Authentication Protocol:
Default is Auto. Please consult your service provider on whether to use
PAP, CHAP or MSCHAP.
PIN:
PIN stands for Personal Identification Number. A PIN code is a numeric value used in certain
systems as a password to gain access, and authenticate. In mobile phones a PIN code locks the
SIM card until you enter the correct code. If you enter the PIN code incorrectly into the phone 3 times
in a row, then the SIM card will be blocked and you will require a PUK code from your network/
service provider.
L
Connect on Demand:
If you want to make UMTS/GPRS call only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access
the Internet). In this mode, you must set Idle Timeout value at same time. Click on Connect on
Demand, the Idle Timeout field will display.
Idle Timeout:
Auto-disconnect the broadband firewall gateway when there is no activity on
the line for a predetermined period of time. Default is 600 seconds.
L
Keep Alive:
Check Enable to allow the router to send message out every 7 seconds (can be
changed base on need) to prevent the connection being dropped by ISP.
IP Address:
The IP address is used to “ping”, and router will ping the IP to find whether the
connection is still on.
NAT:
Check to enable the NAT function.
Firewall:
Enable to drop all traffic from WAN side. If enabled, all incoming packets by default would
be dropped, and please turn to IP Filtering Incoming to add allowing rules.
MTU:
MTU (Maximum Transmission Unit) is the size of the largest datagram that IP will attempt to
send through the interface.
Select default gateway interfaces:
Select from the interfaces the default gateway, here commonly
we select USB3G0.
Selected DNS Server Interfaces:
Three ways to set a DNS server.
L
Available WAN interfaces:
Select a desirable WAN interface as the DNS server.
L
Static DNS Address:
To specify DNS server manually by entering your primary and
secondary DNS server addresses.
L
Parental Controls:
If user registers and gets a DNS account in the parental control provider
website, expecting to enjoy a more reliable and safer internet surfing environment, please
select this option (need to configure at
Parental Control Provider ).
Click
Apply
to confirm the settings.