84
Router> show interface list
Oper.
IP
BRG
Comp.
IfName
Type
State
MTU
Status
Status
Status
-------------------------------------------------------------------
lo
LOOPBACK
Up
1536
Enable
Disable n/a
lan
ETHERNET
Up
1500
Enable
Enable
n/a
show internet access time
Description:
The current setting of the Internet time restriction is displayed. See
set internet access time
for details.
Example:
Router> show internet access time
Day-of-the-week
: Mon-Sat
Time-of-day
: 13:30- 5:00
show system
Description:
This command displays system and SNMP related configuration. All of them can be
changed through individual commands, except for the S/W and H/W version numbers that are constant
for each version of the product.
Example:
Router> show system
System Name: Router
Up Time: 0 months 1 days 21:21:05
----------------------------------------------------------------------
system description:
IP Brouter Over ISDN Line
system contact:
Unknown
system location:
Unknown
community string (read):
public
Trap generation:
Disabled
Total Serial Ports: 1 S/W Version: 1.03
H/W Version: 1.0
MAC Address:
00-60-20-10-00-70
Console Baud Rate : 19200
Console Timeout:
10(min)
Learning State:
Enabled
Remote Management State: Enabled
DHCP State:
Enabled
IP RIP Mode:
Active Ver.1
IP address:
0.0.0.0
network mask: 0.0.0.0
Private IP address: 192.168.168.230
network mask: 255.255.255.0
Enabled features:
HTTP Compression SNMP Filter NAS CLI L2L Bridging
show system log
Description:
The system log contains logs of various events of interest, depending on the log level set at
the time. Common events include login, a PPP connection goes up or down (log level 2), a frame relay
DLCI connection goes up or down (log level 2), … as well as certain protocol progress messages for